KEM
Equipment, Inc.

800-304-0751
503-692-5012
503-692-1098 FAX

Locate a Service Dealer

Downloads:

 200 Series Jet Operators Manual

Jet Drawings:

 2 Stage Dimensions |   3 Stage Dimensions

 Jet Bucket Area |   Jet Bucket Removed |   Jet Main Shaft Exploded

Kodiak 2 Stage Jetdrive

A compact two stage jet drive featuring stainless steel impellers. Strong one-piece reverse bucket can be engaged in an emergency to act as a jet-assisted brake. True axial-flow jet design for instant acceleration and maximum fuel economy.

Applications Suitability Planing Craft

  • Jet Unit Weight: 120 lbs. (55 kg)
  • Maximum Laden Boat Weight: 3800 lbs. (1800 kg)
  • Minimum Power/Laded Weight: 4.5 hp/100 lbs. (10 hp/100 kg)
  • Number of Stages: 2
  • Power Range (gasoline): 100-415 hp (75-309 kW)
  • Suitable Engine Size: 180-400 CID (3-6.6 L)
  • Suitable Engine Type: Large 6 cylinder to small V8
  • Typical Boat Length: 18′-20′ Planing Craft
  • 2 Stage Jet Weight: 145 lbs.

For a computer analysis, please provide:

  • Deadrise Angle Amidships
  • Deadrise Angle at Transom
  • Engine(s) Max Int. rating hp/rpm
  • Engine(s) Max Cont. rating hp/rpm
  • Maximum laden displacement
  • Maximum Chine Beam
  • Required Speed(s)
  • Proposed Engine(s) Make and Model
  • Waterline Length

Standard Equipment and Specifications

(listed alphabetically; subject to change without notice)

  • Corrosion Protection: Lightweight silicon-aluminum alloy castings with insulation. Stainless steel shaft, bolts and rings, and impellers, sacrificial anodes, and stainless steel impellers.
  • Coupling Interface: 1′ ⅜″ SAE splined shaft
  • H-Bar Driveline: Included
  • Impeller Diameter: 7 ½″ stainless steel
  • Intake Screen: Fixed steel bar
  • Mounting: Conventional inboard mount, all bolts, etc.
  • Number of Stages: 2
  • Rear Mount Kit: Standard
  • Rotation: Left hand (counter-clockwise)
  • Transom Angle: 0° to 14°
  • Unit Weight: 120 lbs (55 kg)
  • Water Offtake: Included

Note: Standard jet does not include marine engine, exhaust outlets, flywheel adaptor, steering controls, reverse controls, instrument pack, or wiring.

Optional Equipment

  • Inspection hatch extension
  • Optional impeller pitches and nozzle sizes for fine engine matching (at no extra charge)
  • Hand-held screen rake
  • Sandtrap for filtration of engine cooling water

Warranty

Two year Factory Warranty

Kodiak 3 Stage Jetdrive

A compact three stage jet drive featuring stainless steel impellers. Strong one-piece reverse bucket can be engaged in an emergency to act as a jet-assisted brake. True axial-flow jet design for instant acceleration and maximum fuel economy.

Applications Suitability Planing Craft

  • Maximum Laden Boat Weight: 4800 lbs. (2200 kg)
  • Minimum Power/Laded Weight: 4.5 hp/100 lbs. (10 hp/100 kg)
  • Number of Stages: 3
  • Power Range (gasoline): 200-450 hp (149-299 kW)
  • Suitable Engine Size: 250-500 CID (4-8 L)
  • Suitable Engine Type: Six and eight cylinder gasoline and diesel
  • Typical Boat Length: 20′-22′ Planing Craft
  • 3 Stage Jet Weight: 160 lbs.

For a computer analysis, please provide:

  • Deadrise Angle Amidships
  • Deadrise Angle at Transom
  • Engine(s) Max Int. rating hp/rpm
  • Engine(s) Max Cont. rating hp/rpm
  • Maximum laden displacement
  • Maximum Chine Beam
  • Required Speed(s)
  • Proposed Engine(s) Make and Model
  • Waterline Length

Standard Equipment and Specifications

(listed alphabetically; subject to change without notice)

  • Corrosion Protection: Lightweight silicon-aluminum alloy castings with insulation. Stainless steel shaft, bolts and rings, and impellers, sacrificial anodes, and stainless steel impellers.
  • Coupling Interface: 1′ ⅜″ SAE splined shaft
  • H-Bar Driveline: Included
  • Impeller Diameter: 7 ½″ stainless steel
  • Intake Screen: Fixed steel bar
  • Mounting: Conventional inboard mount, all bolts, etc.
  • Number of Stages: 3
  • Rotation: Left hand (counter-clockwise)
  • Transom Angle: 0° to 14°
  • Unit Weight: 130 lbs (59 kg)
  • Water Offtake: Included

Note: Standard jet does not include marine engine, exhaust outlets, flywheel adaptor, steering controls, reverse controls, instrument pack, or wiring.

Optional Equipment

  • Inspection hatch extension
  • Optional impeller pitches and nozzle sizes for fine engine matching (at no extra charge)
  • Hand-held screen rake
  • Sandtrap for filtration of engine cooling water

Warranty

Two year Factory Warranty


10800 S.W. Herman Road
Tualatin, OR 97062
503-692-5012
© 2017 KEM Equipment, Inc.
KEM Equipment website by PIP Marketing/Signs/Print.